It sits on your iron and acts as a barrier: iron at full heat with no shine and no fabric sticking.
Tengo una Rowenta express steam (suela de 23x12 cm) y me ha costado mucho encontrar una que se ajustase tan bien. Se engancha en la punta y gracias al muelle no se mueve nada. No deja brillos y se desliza genial. Un acierto.
Carlos Verified purchase
Me la recomendó una amiga y estoy encantada con la compra porque es cierto que no hace brillos en las prendas de color negro y se plancha muy bien, evita que la prenda se queme y se desliza sobre las prendas muy bien.
África F. Verified purchase
La compre para evitar brillos en prendas oscuras, sobre todo. Y se momento cumple su misión. Se desliza perfectamente y en general contenta de sus resultados. No he dado cinco estrellas en durabilidad porque apenas la he usado un par de veces. Se adapta a la perfección a la suela de la plancha.
Carmen Verified purchase
Soy modista y puedo decir con conocimiento que esta es una de las mejores suelas protectoras que he tenido. Dispersa el vapor de la plancha de manera que hace que la eliminación de arrugas sea mas fácil y rápido. Es realmente buenísima Recomendable 100%
Sylvia Verified purchase
It clips onto the soleplate while the iron is cold and holds itself in place. Then you switch on and iron as usual.
Steam generators too. It works the same, with one caveat: when you finish you have to take the cover off so you can rest the iron on its base and put the unit away. It's a two-second job, but worth knowing beforehand.
Always remove it cold, once the iron has cooled down completely.
It's made to fit the vast majority of domestic irons and steam generators on the market. Even so, there are unusual models with an oversized plate, so it's worth checking.
The inside of the cover is 25 × 14 cm. Turn your iron soleplate up and measure the plate from tip to heel and side to side: if it fits within those figures, it fits. Ten seconds and the doubt is gone.
A damp cloth with the cover cold and that's it. No scourers and no abrasive products on the non-stick coating: that's exactly what makes it glide.
Store it separately, not inside the iron, so it doesn't get scratched against the plate.
Free shipping to 12 European countries, with no minimum order.
You have 60 days to send it back, free and without explaining yourself. If something arrives damaged, message us on WhatsApp and we sort it out the same day.
Anti-shine soleplate protector for irons
€19,90
If the soleplate is scratched or no longer glides, you do not need a new iron. Put the cover on it and you have a smooth surface again.
The shine on dark trousers and wool is left by hot metal touching the fibre. The cover goes in between: you iron on the right side without a damp cloth.
You stop turning the dial up and down every time you go from cotton to synthetics. You iron the whole load in one go.
The non-stick layer makes the iron glide over the garment instead of dragging it.
It is made to fit almost all household irons and steam generator irons. The inside measures 25 × 14 cm: measure your soleplate and you will know in ten seconds.
No small print
| What we compare | ErrekeAluminium cover | Damp cloth on topThe old trick | Plastic coverThe cheap one |
|---|---|---|---|
| Shiny marks | ✓No | ✓No | ✓No |
| The material | ✓Aluminium | Fabric | ✕Bends with the heat |
| The pace | ✓You iron in one go | ✕Wetting and wringing the cloth | ✓In one go |
| The old iron | ✓A smooth surface again | ✕Stays the same | While it lasts |
| The fit | Measure your iron: 25 × 14 cm | ✓Fits them all | Measure your iron |
We compare with the most common tricks and covers, not with any particular brand.
Cast aluminium in the tins, olive and teak in the boards, non-stick coated aluminium for ironing.
Aluminium with a non-stick coating, made in Europe.
With an average rating of 4.7 out of 5. Thousands of homes already cook and organise with Erreke.
